Products Under Development

 
photos of prototype WM1 Winch Mount inserted into FbG front bumper (color-matched to 92 XJ fender flares)

NOTES:  A test/prototype WM1 was taken to the NAXJA Moab 2003 event for evaluation & comment. A few minor changes and improvements are being incorporated into the final product.

2x2 insert with a universal winch mounting tray, 1 ¼ inch tubular steel wrap-around protection frame

• designed to mount all newer 8000 lb. to 9500 lb. winches with bottom-mounting bolts

• hawse or roller fairlead adaptable

• specifically designed to be used in our FbG, FbK, RbA & RbM bumpers - adaptable to other center-mounted 2x2 receiver bumpers

• easily removed for storage & security

• a front license plate holder made for offroaders is available to fill the receiver opening & comply with state laws regarding front license plates

Development Status
  scheduled date of completion: 1/04

• center-mounted 2x2 receiver
• two tow points
• reinforced bumper mounting system
• 4 inch bumper face
• tapered ends
• skid plate protecting rear of fuel tank
• corner profile blends & matches profile of stock rear quarter panels
• ends can easily be replaced with tire/accessory rack mounting ends

• center-mounted 2x2 receiver
• two tow points
• reinforced bumper mounting system
• 4 inch bumper face
• tapered ends
• skid plate protecting rear of fuel tank
• modified rear quarter tapers back at 45 deg. - protected by 3/16 plate
• ends can easily be replaced with tire/accessory rack mounting ends

Development Status
 scheduled date of completion: 4/04

Development Status
 scheduled date of completion: 4/04

Development Status
 scheduled date of completion: 4/04